PLC API 4.2.1.4.17 FB_CTRL_ZERO_ZONE_DAMPING This function block enables zero point damping to be realized in order to minimize control interventions in the range | actual value - setpoint | Transfer behavior in the time range TF4100 116 Version: 2.2.4 Name Type Description tCtrlCycleTime TIME Cycle time with which the control loop is processed. This must be greater than or equal to the TaskCycleTime. The function block uses this input value to calculate internally whether the state and the output values have to be updated in the current cycle. tTaskCycleTime TIME Cycle time with which the function block is called.
If the function block is called in every cycle this corresponds to the task cycle time of the calling task. fKp FLOAT Controller amplification / transfer coefficient tTu TIME Dead time tTg TIME time constant