Тексел ТХ01-RS — 7.3 Output settings

Figure 7.7 – Types of logic (П- and U-shaped) when the outputs operates as a comparator NOTICE 1. With П- or U-shaped logic, to suppress bounce during switching, there is an additional hysteresis of operation of 5 % of the range between the limits (2Δ) (see Figure 7.7 ). 2. When the pulse repetition rate at the counting input is more than FrEQ , the value equal to the value calculated for FrEQ is set at the output. Recommendations for setting the output: • set oFFdo = 0 and oUtdo = 0; 44