8 Maintenance 8.1 Maintenance DANGER Cut off all power before maintenance. The maintenance includes: • cleaning of the housing and terminal blocks from dust, dirt and derbis • checking the device fastening • checking the wiring (connecting leads, fastenings, mechanical damage) NOTICE The device should be cleaned with a damp cloth only. No abrasives or solvent- containing cleaners may be used. 8.2 Calibration Calibration is intended to restore the metrological characteristics of the device in case of their change after prolonged use or repair work and consists in selecting the minimum and maximum values of the output signal.
CAUTION Calibration of the device should be carried out only by qualified specialists of metrological services. 49