Тексел ТХ01-RS — 8.2 Calibration

Calibration is carried out only for analog outputs. To do this: • connect the load (R load ) and a voltmeter to the output according to Figures 8.1 (for output of type У) and 8.2 (for output of type И); • apply power to the device. NOTICE As R load , you can use the resistance box P4831 or similar with an accuracy class of not more than 0.05, and as a voltmeter, a device with an accuracy class of not more than 0.05, for example, B1-12. 0 is displayed – the device is in operating mode. 50