142 Trouble Description Recovery method Image/ Illustra- tion The print position is mis- aligned The paper you are using dif- fers from the paper set in the [Media Layout]. If the paper you are using differs from the paper set in the [Media Layout], the image may not be printed at the correct position. Set Media Layout correctly. For more information, see step 9 in "Replac- ing Roll Paper with Fanfold Paper" on page 66, or step 10 in "Replacing Fanfold Paper with Roll Paper" on page 75.
- The label size and printable area do not match It is product specifications On the [General] tab, if you select [User Defined...] in Media Layout but do not select [Borderless Printing], the area minus the 1.5 mm margins around the label becomes the printable area. Enable [Borderless Printing] if you want to use the whole label size as the printable area. When [Borderless Printing] is enabled, images may be printed on the backing paper; therefore, remove the 1.5 mm mar- gin on all edges from the print data. - I want to perform border- less printing - To perform borderless printing, use the label that is cut in half and still has edge cutoffs.
Specify a printable area that is larger than the actual label size and print. See "Setting the label size and paper layout for borderless printing" on page 165. - Print position and cut posi- tion are misaligned The print position may be misaligned depending on the paper you are using. Adjust the position. On the printer driver’s [Printer Utilities] tab, click [Printer Setting Utility]. When the PrinterSetting screen is displayed, click [Printer Adjustment] and perform [Paper Feed Adjustment]. You can perform [Cut Position Adjustment] [Print Start Position Adjustment (Vertical Direction)], and [Print Start Position Adjust- ment (Horizontal Direction)].
See "Paper Feed Adjustment" on page 125. -