2.3 Setup Flow To get the best performance from your printer, you need to make appropriate settings based on your environment. The setup flow is as follows: 1. Printer setup ❏ Attach the feeder guide. (See Section “2.4.1, Attaching the Feeder Guide,” (page 2-5).) ❏ Attach the pocket unit (only for the ASF model). (See Section “2.4.2, Attaching the Pocket Unit,” (page 2-5).) ❏ Connect the power supply for the printer. (See Section “2.4.3, Connecting the Printer Power Supply,” (page 2-7).) ❏ Install the ink cartridge. (See Section “2.4.4, Installing the Ink Cartridge,” (page 2-8).) ❏ Install roll paper. (See Section “2.4.5, Installing Roll Paper,” (page 2-10).) 2.
Connect the printer and host PC/POS terminal (See Section “2.5, Connecting the Printer to the Host PC,” (page 2-12).) 3. Install and set up drivers (See Section “2.6, Installing and Setting Up the Drivers,” (page 2-12).) 4. Adjust various settings (if necessary). (See Section “2.7, Adjusting Various Settings,” (page 2-13).) 5. Complete setup. Note: Install the printer horizontally. 2-4 Setup Rev. F