TM-J9000/J9100 Technical Reference Guide 2.4 Printer Setup 2.4.1 Attaching the Feeder Guide You can make sure a check is inserted straight by using the feeder guide. Attach the feeder guide as described in the steps below: 1. Hold the edge of the feeder guide carefully. 2. Insert the dowels of the feeder guide into the holes inside the printer; then bring it down until it stops as shown in the illustration below. There are holes for the dowels in both sides of the printer check slot Dowel ➀ ➁ Figure 2-5 Attaching the feeder guide Note: With the ASF model, be sure to attach the feeder guide; otherwise, you cannot load multiple sheets.
2.4.2 Attaching the Pocket Unit The pocket unit is packed with the printer model with the auto sheet feeder (ASF) function. Follow the steps below to attach it. 1. Push down the pocket cover on the left of the printer to remove it. Figure 2-6 Removing the pocket cover Note: To attach the pocket cover, push it up. Rev. F Setup 2-5