Appendix When the paper removal detector is enabled (with backfeed) When the paper removal detector is enabled, the top margin can be changed by feeding paper backward. Autocut position Approx. 14.0 mm Print start position Center of the print head Paper feed direction Built-in Memory Electrical Specifications *1: Average power consumption measured under our operating conditions. It varies depending on the conditions of use and the model. 129 Approx.
5.0 mm Receive buffer 1 MB (with firmware Ver.1.08 ESC/POS or later) 4 KB (other than above) Area for downloaded characters 12 KB (also used for downloaded bit images) Area for macro 2 KB Area for NV graphics 384 KB Area for downloaded graphics 208 KB Area for user NV memory 1 KB Power supply PS-190 (power supply with the AC adapter) Operating voltage DC 24 V Current consumption Operating (24V, 25°C, standard print density) Standby Approx. 1.8 A on average * When print ratio is approximately 18% * Font A * 48 characters mode * Printing ASCII characters (repeating 20h to 7Fh) in 30 lines + paper feed 5 lines + Autocut Approx.
0.1 A on average AC power consumption*1 Operating (100 - 230 V/50 - 60 Hz) Standby Approx. 31.3 W Approx. 1.6 W