Appendix Environmental Conditions 131 Temperature Operating / Humidity Storage When using plain thermal paper 5 to 45 degrees C, 10 to 90% RH, non condensing [%RH] 34°C, 90% 90 80 humidity 40°C, 65% 60 Relative 45°C, 50% Operating 40 environment range 20 10 0 0 10 20 30 40 50 [°C] Ambient temperature When using liner-free label paper Temperature and humidity range guaranteed by the liner-free label paper. -10 to 50 degrees C, 10 to 90% RH (excluding paper) Vibration When packed resistance Frequency: 5 to 55 Hz Acceleration: Approx. 19.6 m/s2 {2G} Sweep: 10 minutes (half cycle) Time: 1 hour Orientation:
x, y, and z After being subjected the vibration, there should be no visual or operational problems on the exterior or interior. Shock When packed resistance When unpacked Packing: Epson standard package specifications Height: 60 cm {23.62"} Orientation: 1 corner, 3 edges, and 6 surfaces After being dropped, there should be no visual or operational problems on the exterior or interior. Height: 5 cm {1.97"} Orientation: Lift one edge and release it (for all 4 edges) After being dropped while not operating, there should be no visual or operational problems on the exterior or interior. Noise Operating Approx. 52 dB (ANSI bystander position) Note:
The above noise value is based on Epson evaluation conditions. Noise varies depending on the paper used, printing contents, and the setting values, such as print speed or print density. Waterproof performance IPX2 compliant (only when installed vertically) Note: This is the result of an evaluation conducted by a third party evaluation organization based on JISC0920 (IEC60529:2001), and does not guarantee conformance to the standard, no damage, or no failure. Altitude Approx. 3,000 m or less Operating environment range