Chapter 1 Product Overview Column emulation mode The printer is equipped with the function to emulate 42 column mode. If you have replaced a printer that can print at the dot density of 180 dpi on the paper that is 80 mm wide with TM-P80 (Dot density: 203 dpi), when you set the Column emulation mode to 42 column mode, the print results will be similar. For setting the Column emulation mode, see "Software Settings" on page 49 . For the 42 column of the Printing Specifications, Character Specifications and Printable Area, see "Product Specifications" on page 89 . 1 25