Error Status When an error occurs, the printer stops printing, goes offline, and the Error LED flashes. There are three error types: automatically recoverable errors, recoverable errors, and unrecoverable errors. Automatically Recoverable Errors Printing is temporarily suspended when automatically recoverable errors occur. They can recover automatically, as described below. Printing is no longer possible when a recoverable error occurs. They can be recovered easily by sending an error recovery command after eliminating the cause of the error. The error recovery command is valid only if a recoverable error (excluding automatically recover- able errors) occurs.
26 Error Error description Error LED flash code Recovery measure Paper error The black mark cannot be detected. Recovers automatically when the cover is opened. Temperature error The temperature of the print head, motor driver IC, or battery is high. Recovers automatically when the temperature goes down. Recoverable Error Error Error description Error LED flash code Recovery measure Paper layout error The paper layout differs from the actual paper. Paper jam occurs. Recovers by sending an error recovery command (“DLE ENQ”). Autocutter error (autocut- ter model only) Autocutter does not work correctly. Send the error recovery command, or turn the power off and on to recover.