Chapter 3 Advanced Usage Feature Automatic line feed Always disabled (default setting) Always enabled USB power-saving function Disabled Enabled (default setting) The USB power-saving function is valid only when the USB interface communication condition is set to the vendor-defined class and the system configuration is set so that the USB driver can support the USB power-saving function.
Error signal output Enabled (default setting) Disabled Data processing with reception error Prints “?” (default setting) Ignored Recovery conditions from receive buffer BUSY Releases the BUSY state when the remaining receive buffer capacity reaches 256 bytes (default setting) Releases the BUSY state when the remaining capacity of the receive buffer reaches 138 bytes. Receive buffer capacity 4 KB (default setting) 45 bytes 27