5 INSTRUCTIONS FOR USE 5.1 Power-on 1. Take the power cable. Connect one end to the Power Input Port on the back of T120A, and connect the other end to the power supply. Note: The power supply must deliver a voltage higher than 90V and its output power must be higher than that of T120A. 2. Press the Power Button on the back of T120A to start it. (T120A will get started in 5~10 seconds.) 3. When you start T120A for the first time, please set up the language and time. 1) On the homepage, press or to choose the “Language” option, and then press to go to the setting page. Press or to choose the language that you want, and then press . 2) Press and hold for 3 seconds to go back to the homepage.
Press or to choose the “Date and Time” option, and then press to go to the setting page. Press or to set the date and time. After you set up a value, press and then move to the next one. EN | 009 EN | 012