cisco — Verifying the Provisioning of an EVPN VXLAN Layer 2 Overlay Network

state is UP, type is Layer 2 VNI (L2CP); VLAN 10 is mapped to VNI 10001 L2 VNI IPv6 IRB down reason: BDI or associated L3 BDI's IPv6 addr un-configured IPv6 topo_id disabled L2CP VNI local VTEP info: Layer 2 VNI provisioning VLAN: 10 Confirms that mapping is with VLAN 10 SVI if handler: 0x4D Local VTEP IP: 10.255.1.1 VxLAN Tunnel IP Core IRB info: Layer 3 VPN provisioning (not required for troubleshooting a scenario with pure Layer 2 VPN packet path L3VNI: 99999 VRF name: vxlan VLAN: 99 V4TopoID: 0x2 V6TopoID: 0xFFFF Local VTEP IP: 10.255.1.1 SVI if handler: 0x50 SVI MAC: 7035.0956.7EDD VNI Detailed statistics:

Pkts In Bytes In Pkts Out Bytes Out 0 0 18158681548 27383291735556 Verify That the Layer 2 VNI VXLAN Tunnel Pseudoport is added to the Access VLAN in Layer 2 Forwarding Information Base (FIB) The following examples show how to verify that the Layer 2 VXLAN tunnel pseudoport is added to the access VLAN in Layer 2 FIB: VTEP-1# show l2fib bridge-domain 10 detail Bridge-domain will be same as VLAN number Bridge Domain : 10 Reference Count : 14 Replication ports count : 2 Unicast Address table size : 3 IP Multicast Prefix table size : 3 Flood List Information : Olist: 5109, Ports: 2 VxLAN Information : VXLAN_DEC nv1:10001:239.10.10.10 Port Information :

BD_PORT Tw1/0/1:10 Pseudoport has been added to bridge-domain: (physical port + the BD number for the VLAN) VXLAN_REP nv1:10001:239.10.10.10 VXLAN Replication group Unicast Address table information : 008e.7391.1946 VXLAN_CP L:10001:10.255.1.1 R:10001:10.255.2.1 IP Multicast Prefix table information : Source: *, Group: 224.0.0.0/24, IIF: Null, Adjacency: Olist: 5109, Ports: 2 Source: *, Group: 224.0.1.39, IIF: Null, Adjacency: Olist: 5109, Ports: 2 Source: *, Group: 224.0.1.40, IIF: Null, Adjacency: Olist: 5109, Ports: 2 Troubleshooting BGP EVPN VXLAN Verifying the Provisioning of an EVPN VXLAN Layer 2 Overlay Network Troubleshooting BGP EVPN VXLAN 10