cisco — Verifying Intra-Subnet Traffic Movement in an EVPN VXLAN Layer 2 Overlay Network

VTEP-2# show l2fib bridge-domain 10 detail Bridge Domain : 10 Reference Count : 15 Replication ports count : 2 Unicast Address table size : 4 IP Multicast Prefix table size : 3 Flood List Information : Olist: 5109, Ports: 2 VxLAN Information : VXLAN_DEC nv1:10001:239.10.10.10 Port Information : BD_PORT Gi2/0/1:10 Pseudoport has been added to bridge-domain: (physical port + the BD number for the VLAN) VXLAN_REP nv1:10001:239.10.10.10 VXLAN replication group Unicast Address table information : 005f.8602.10c6 VXLAN_CP L:10001:10.255.2.1 R:10001:10.255.1.1 IP Multicast Prefix table information : Source: *, Group: 224.0.0.0/24, IIF: Null, Adjacency: Olist: 5109, Ports: 2 Source: *, Group:

224.0.1.39, IIF: Null, Adjacency: Olist: 5109, Ports: 2 Source: *, Group: 224.0.1.40, IIF: Null, Adjacency: Olist: 5109, Ports: 2 Verifying Intra-Subnet Traffic Movement in an EVPN VXLAN Layer 2 Overlay Network The following figure illustrates the movement of traffic from host devices connected to VTEP 1 to host devices connected to VTEP 2: Figure 2: Movement of traffic in an EVPN VXLAN network Through Layer 2 and Layer 3 VNIs In the above figure, Layer 2 traffic moves from host device 2 to host device 3 through the Layer 2 VNI 10001. To verify the movement of intra-subnet traffic in the EVPN VXLAN Layer 2 overlay network, perform these checks: 1.

Verify that the Local MAC Addresses Have Been Learned in IOS-MATM, on page 12 2. Verify that Both Local and Remote MAC Addresses are Learned in FED-MATM, on page 12 Troubleshooting BGP EVPN VXLAN Verifying Intra-Subnet Traffic Movement in an EVPN VXLAN Layer 2 Overlay Network Troubleshooting BGP EVPN VXLAN 11