beckhoff TwinCAT 2 — 5.2 TwinCAT System Control

User Interface PLC: A submenu for starting, stopping and resetting a (the) PLC run time sys-tem(s) is opened via PLC. Depending on the number of configured PLC run time systems, another submenu is opened for selecting the run time system. In this case, the 4 PLC run time systems are configured for the TwinCAT system. Each run time system can be controlled separately. Properties: The TwinCAT System Control is started by selecting "Properties". 5.2 TwinCAT System Control The TwinCAT System Control is a dialog-based application with a separate side for each supported system area. The tabs: General [ } 19] System [ } 20] AMS Router [ } 22] PLC [ } 25] Registeration [ } 26] "General" tab:

General System 19 Version: 1.2