User Interface This page shows the basic configuration of the TwinCAT system. Here, TwinCAT servers can be added and removed, and the automatic system start can be activated. Enable Auto Logon: Here you select 'Enable Auto Logon' and enter your user name and your password. Windows NT accepts this setting once you confirm with 'OK'. If you do not enter a password at this stage, the automatic login will only function once (this is a property of Windows NT). Cancelling automatic logging in: In order to stop automatic logging in although the setting has been made, it is necessary to hold the shift key pressed during the login.
This interrupts the Auto Logon, and you can then log into Windows NT in the usual way. TwinCAT can be extended by additional servers. These can be cam switch mechanisms, linear pass controls or other software units. The modularity of TwinCAT now enables this server to be loaded into the TwinCAT system by simple configuration. However, a condition is that the server was compiled with the TwinCAT Server Framework. For Windows NT, TwinCAT servers can be used as unit drivers, thereby enabling the operating state of the TwinCAT server to also be checked in the Windows NT units list. Important:
Changes on the system side should only be carried out by experienced TwinCAT users or in accordance with the instructions from the TwinCAT Support. Add TwinCAT servers This function is necessary when a TwinCAT server is not reported with the system by the standard installation. This can be the case with application-specific TwinCAT servers. Name This is the Windows NT unit name. This name addresses the TwinCAT server of Windows NT. In the case of TwinCAT servers, the unit name corresponds to the file name of the TwinCAT server. Display name Only used for displaying the Windows NT system, and can be freely issued. File path Path to the binary file of the TwinCAT server.
Type At present, only Windows NT drivers can function as TwinCAT servers. "DriverType" must therefore be entered here. In future, Win32 services will also be able to operate as TwinCAT servers. System 21 Version: 1.2