User Interface Start mode TwinCAT servers are started by the TwinCAT System Service. The standard setting is therefore "manual" in this case. A start via Windows NT could be necessary for special TwinCAT servers, which means that the start mode can be changed here. Remove TwinCAT Server: When this dialog is acknowledged with OK, the TwinCAT server is removed from the TwinCAT system and from Windows NT. The binary file of the TwinCAT server is, however, not deleted from the hard disk. Properties of a TwinCAT server Double clicking on the server name in the server list or pressing the "Properties" button opens the above dialog. In this dialog, the properties of a TwinCAT server (e.g.
the path) can be adapted later. "AMS Router" tab: AMS Router The local machine address, the reserved memory and the connections to other TwinCAT systems are defined in the settings for the AMS Message Router. AMS Net Id This is the address of the local computer in the TwinCAT network. The "AMS Net Id" consists of 6 bytes and is represented in a point notation. The "Net Ids" must be issued by the project supervisor and must not be re- peated in the TwinCAT network. A standard + "1.1" is generated from the installation of an AMS Net Id from the IP address of the system (if present). If no IP address can be determined during installation. the AMS Net Id ".1.1.1.1.1.1" is generated.
Remote Computer List of TwinCAT systems which can be reached in the TwinCAT network. Add remote connection System 22 Version: 1.2