Editors 2) Every input: 3) Every operator, function, or function block: 4) Outputs, if an assignment or a jump comes afterward: 5) The lined cross above an assignment, a jump, or a return instruction: 6) Behind the outermost object on the right of every network ("last cursor position," the same cursor position that was used to select a network): 7) The lined cross directly in front of an assignment: How to set the cursor The cursor can be set at a certain position by clicking the mouse, or with the help of the keyboard. Using the arrow keys, you can jump to the nearest cursor position in the selected direction at any time.
All cursor positions, including the text fields, can be accessed this way. If the last cursor position is selected, then the or arrow keys can be used to select the last cursor position of the previous or subsequent network. An empty network contains only three question marks "???". By clicking behind these, the last cursor position is selected. 'Insert' 'Assignment' Shortcut: + This command inserts an assignment.
Depending on the selected position, insertion takes place directly in front of the selected input (Cursor Position 2), directly after the selected output (Cursor Position 4), directly before the selected line cross (Cursor Position 5), or at the end of the network (Cursor Position 6). For an inserted assignment, a selection can be made accompanying the entered text "???", and the assignment can be replaced by the variable that is to be assigned. For this you can also use the Input Assistant. In order to insert an additional assignment to an existing assignment, use the "Insert" "Output" command. 'Insert' 'Jump' Shortcut: + This command inserts a jump.
Depending on the selected position, insertion takes place directly in front of the selected input (Cursor Position 2), directly after the selected output (Cursor Position 4), directly before the selected line cross (Cursor Position 5), or at the end of the network (Cursor Position 6). For an inserted TX1200 133 Version: 1.3