Beckhoff Automation GmbH & Co. KG TX1200 — 5.7 Ladder Diagram Editor

Editors 3. Every Coil 4. The Connecting Line between the Contacts and the Coils The Ladder Diagram uses the following menu commands in a special way: 'Insert' 'Contact' Shortcut: + Use this command in the LD editor in order to insert a contact in front of the marked location in the network. If the marked location is a coil (Cursor Position 3) or the connecting line between the contacts and the coils (Cursor Position 4), then the new con-tact will be connected serially to the previous contact connection. The contact is preset with the text "???". You can click on this text and change it to the desired variable or the desired constant. For this you can also use the Input Assistant.

You can activate the options Comments per Contact and Lines for variable comment in the dialog 'Function Block and Ladder Diagram Options' ('Extras' 'Options') to reserve a certain number of lines for the variable name. This might be useful, if long variable names are used, to keep the network short. Also regard the option Networks with linebreaks, which you also can activate with the command 'Extras' 'Options' in the dialog 'Function Block and Ladder Diagram Options' . TX1200 138 Version: 1.3