Resources Definition of the message text: For action types 'Message', 'Print', 'Email' or 'Variable' you can define a message text which should be output in case of an Alarm Event. Line breaks at the text definitions in 'Message', 'Email' or 'Variable' can be inserted by + . The following placeholders can be used when defining the alarm message: Example of defining an alarm message: For a definition of a message box enter the following in the message window: Further on when defining the alarm in the alarm group enter in column 'Message' the following: "Temperature critical !". The output of the final alarm message will be like follows:
The message text will also be affected in case of a change of the project language if it is included in a *.vis-file or a translation file *.tlt. BUT: In this case - like texts referring to a visualization it has to be set between two "#"-characters (e.g. in the example shown above : "#Temperature critical !#" and "TIME /EXPRESSION: MESSAGE #current#: VALUE", in order to get the text entered in the translation file as ALARMTEXT_ITEMs.) A l og file for action 'Save' is to be defined in the configuration of the alarm group. TX1200 168 Version: 1.3 MESSAGE The message text which is defined for the particular alarm in the configuration of the alarm group will be used.
DATE Date, when the alarm status was reached (INTO). TIME Time of alarm entry. EXPRESSION Expression (defined in alarm group) which has caused the alarm. PRIORITY Priority of the alarm (defined for alarm group.) VALUE Current value of the expression (see above). TYPE Alarm type (defined in alarm group) CLASS Alarm class (defined in alarm group) TARGETVALUE Target value for alarm types DEV+ and DEV- (defined in alarm group) DEADBAND Tolerance of the alarm (defined in alarm group) ALLDEFAULT Any information on the alarm will be output, like described for the line entries in a log file (History).