Beckhoff Automation GmbH & Co. KG TX1200 — 7.5 Compiler Errors

Reference programming TX1200 244 Version: 1.3 Number Error Message Possible Cause 4264 'CASE' requires selector of an integer type Make sure that the selector is of an integer or bitstring data type (e.g. DINT, DWORD). 4265 Number expected after ',' In the enumeration of the CASE selectors there must be inserted a further selector after a comma. 4266 At least one statement is required Insert an instruction, at least a semicolon. 4267 Function block call requires function block instance The identifier in the functionblock call is no instance. Declare an instance of the desired functionblock or use the name of an already defined instance. 4268 Expression expected Insert an impression here.

4269 'END CASE' expected after 'ELSE'-branch _ Terminate the 'CASE' instruction after the 'ELSE' part with an 'END CASE'. _ 4270 'CASE' constant '%ld' already used A 'CASE' selector may only be used once within a ‘CASE' instruction. 4271 The lower border of the range is greater than the upper border. Modify the area bounds for the selectors so that the lower border is not highte than the upper border. 4272 Exptecting parameter '%s' at place %d in call of '%s'! You can edit a function call in that way, that also the parameter names are contained, not only the parameter values. But nevertheless the position (sequence) of the parameters must be the same as in the function definition.

4273 Parts of the 'CASE'-Range '%ld..%ld' already used in Range '%ld..%ld' Make sure that the areas for the selectors which are used in the CASE instruction, don’t overlap. 4274 Multiple 'ELSE' branch in 'CASE' statement A CASE instruction may not contain more than one ‚ELSE' instruction. Jump requires 'BOOL' as input type Make sure that the input for the jump respectively the RETURN instruction is a boolean expression. 4301 POU '%s' need exactly %d inputs The number of inputs does not correspond to the number of VAR INPUT and VAR IN OUT _ _ _ variables which is given in the POU definition.

4302 POU '%s' need exactly %d outputs The number of outputs does not correspond to the number of VAR OUTPUT variables which is _ given in the POU definition. 4303 '%s' is no operator Replace ' ' by a valid operator. 4320 Non-boolean expression ' ' used with contact The switch signal for a contact must be a boolean expression. 4321 Non-boolean expression ' ' used with coil The output variable of a coil must be of type BOOL. 4330 Expression expected at input 'EN' of the box ' ' Assign an input or an expression to the input EN of POU ' ’. 4331 Expression expected at input ' ' of the box ' ' The input of the operator POU is not assigned.

4332 Expression expected at input ' ' of the box ' ' The input of the POU is of type VAR IN OUT _ _ and is not assigned. 4333 Identifier in jump expected The given jump mark is not a valid identifier. 4334 Expression expected at the input of jump Assign a boolean expression to the input of the jump. If this is TRUE, the jump will be executed. 4335 Expression expected at the input of the return Assign a boolean expression to the input of the RETURN instruction. If this is TRUE, the jump will be executed. 4336 Expression expected at the input of the output Assign a suitable expression to the output box.