Beckhoff Automation GmbH & Co. KG TX1200 — 10.1.2 Insert Visualization element

Visualization Additional special possibilities for configuring are given by the programmability of element properties via structure variables. Using placeholders in the configuration dialogs may save a lot of effort in case you want to use the same visualization object several times with different configurations. The visualization which is created in the programming system will in many cases be used as the only user interface available for controlling and watching the associated PLC program in online mode. For this purpose, it must be possible to give inputs to the program solely by activating visualization elements.

To reach this you can use special input possibilities during the configuration of the visualization, and you have the option to define special hotkeys for each visualization. 10.1.1 Create a new Visualization A visualization object is a TwinCAT PLC Control object which is managed in the 'Visualization' register of the Object Organizer. It contains an arrangement of visualization elements and can get certain object properties. One or several visualization objects can be created in a TwinCAT PLC Control project and might be linked with each other. In order to create a visualization object in the Object Organizer, you must select the register card for Visualization in the Object Organizer.

Using the 'Project' 'Object Add' command, you can create a new visualization object. Open the 'New visualization' dialog, in which you can enter the name of the new visualization. Once a valid entry is made, that is not a name that is already in use and no special characters used, you can close the dialog with OK . A window opens, in which you can edit the new visualization. NOTICE Name of the vizualisation A vizualisation should not have the same name as another block in the project. For vizualisation changes this can lead to problems. 10.1.2 Insert Visualization element A visualization element is a graphical element, which is used to fill a visualization object.

The available elements are offered in the TwinCAT PLC Control menu bar. Each element gets a separate configuration. You can insert various geometric forms, as well as bitmaps, metafiles, buttons and existing visualizations, into your visualization. Geometric forms at your disposal include: rectangles, rounded rectangles, ellipses/circles, and polygons. Go to the ' Insert ' menu item and select freely from the following commands: ' Rectangle ', ' RoundedRectangle ', ' Ellipse ', ' Polygon Polyline ', ' Curve ', ' Pie ', ' Bitmap ', ' Visualization ', ' Button ', ' Table ', ' Meter ', ' BarDisplay ', ' Histogram ', ' Alarmtable ', ' Trend ', ' WMFfile '.

A check appears in front of the selected command. You can also use the tool bar. The selected element appears pushed down(e.g. . ). If you now go to the editor window with the mouse, you will see that the mouse pointer is identified with the corresponding symbol (e.g. ). TX1200 259 Version: 1.3