Beckhoff Automation GmbH & Co. KG TX1200 — 10.1.4.2 Configure Table

Visualization Dialog for the configuration of a Meter element This dialog will open automatically as soon as you insert a Meter into a visualization object. A Preview is part of the dialog, immediately showing how the element will look as a result of the currently set parameters: Arrowtype : Define the type of the arrow which will point at the current value on the Meter. Possible types: Normal arrow, thin arrow, Wide arrow, Thin needle. Arrow start, Arrow end : Here you define the start and the end positions of the scale on a virtual circular arc in ° Degrees (angle). (Example: a Start angle of 180° and an End angle of 0° will define a upturned semicircle). Arrow color :

This button opens the standard dialog for choosing a color. Define the color of the pointer. Variable/Scale : This button opens the dialog Configure scale and variable: Dialog for Configuring the Scale and Variable for a Meter element Scale start, Scale end : lowest and highest value on the scale, e.g. "-4" and "4". Main scale : Define which intervals on the scale should be marked "with all", that means which should get a scale pitch and a label. If you insert e.g. "2", each second integer value will be indicated. TX1200 289 Version: 1.3