Visualization Sub scale : In addition to the main scale (Label + long pitch lines) here you can define a sub-scale which will be displayed as short pitch lines without any labels. Unit : Define here the scale unit, e.g. "cm" or "sec". The unit is indicated by a label at the origin of the pointer. Scale format (C-Syntax) : According to the C-syntax you can define the display format of the scale labels; see the description concerning Category 'Text'.. Example : If you insert "%1.1f" the scale values will be indicated by a floating-point number with one decimal place before and one after the comma (e.g. "12.0") Variable : Here you can define a variable which is assigned to the pointer position.
(e.g. "PLC_PRG.posvar") Font selection : This button will open the standard dialog for defining the font used in the Meter element. Color areas : This button opens the dialog Configure color areas: Here you can define a separate color for each partition of the scale. Dialog for the configuration of color areas for a Meter Begin of area, End of area : Insert here the start and end values of the scale partition which should get the color defined in the following: Color selection : This button opens the standard dialog for choosing a color.
Confirm your selection with OK, which will close the dialog, and press button Add , whereupon the color and the assigned partition of the scale will be added to the window 'Active areas'. In order to remove an already defined area, select the entry and press Delete . If the option Durable color areas is activated, the defined color ranges will be displayed permanently, otherwise in online mode just that partition of the scale will be colored which contains the current value of the respective value. Label : Depending on which of the options is activated ( inside or outside ), the scale labels are placed at the inside or the outside of the circular arc of the scale. Additional settings:
Frame inside, Frame outside : If one or both options is/are activated, an inner or outer frame will be added to the scale arc. Additional arrow : In addition to the main pointer a little arrow will indicate the current value directly on the scale. Bar Display TX1200 290 Version: 1.3