Beckhoff Automation GmbH & Co. KG TX1200 — 10.1.4.2 Configure Table

Visualization Dialog for the configuration of a Histogram The configuration dialog will be opened as soon as you insert a histogram element into a visualization object. A Preview is part of the dialog, immediately showing how the element will look as a result of the currently set parameters: Presentation : Activate one of the options Barchart or Lines . Show horizontal lines : If this option is activated, horizontal lines spanning the diagram will additionally display the scale gradation. Alarm color : This button opens the dialog Configure alarm , where you define at which value the bar will be displayed in alarm color and which is the alarm color:

Insert the desired threshold value in the edit field and activate one of the Conditions greater than or less than , to define whether values higher or lower than the limit value should set off an alarm. Press button Alarm color to open the standard color dialog for choosing an alarm color. Close both dialogs with OK to confirm the settings and to return to the main dialog for configuring the histogram. Variable/Scale : This button opens the dialog Configure scale and variable , which can be filled like described for the Meter element. Color areas : This button opens the dialog Configure color areas : Here you can define a separate color for each partition of the scale.

See the description of the Meter where the same dialog is available. Bar color : This button opens the standard dialog for choosing a color. Define a color for the bar in normal state (no alarm). Barcount : Insert the desired number of bars (e.g. corresponding to the number of elements of the array). Barwidth : Define the width of the bars in percent by the total width available for one bar. Example: See in the following picture an example of the online display (bars resp. lines) of a histogram which represents an array arr1 [0..4] of INT.

The number of bars appropriately was set to "5", the scale start to "–4", the scale end to "24", the main gradation was set to "2", the sub-gradation to "1" and the scale range 0 – 8 has got assigned another color (dark grey) than the rest of the scale range. Furtheron the bars should be displayed alarm-colored (blue) as soon as the value of the corresponding array element exceeds "8". You see the array elements arr1[2] and arr1[3] currently beeing in alarm state: TX1200 292 Version: 1.3