Visualization 10.1.4.3 Configure Alarm table The element 'Alarm table' is used to visualize alarms, which must be defined before in the TwinCAT PLC Control Alarm configuration. As soon as the element gets inserted in the visualization object, the dialog 'Configure alarm table'. Besides the known categories for configuration of tooltip and security the following settings concerning display and selection in the table can be made: Category Alarm table Dialog for configuration of a alarm table, category Alarm table Define what you want to get displayed in the alarm table: Change alarm group :
Press this button to get the selection tree of the alarm configuration, which offers all alarm groups currently defined. Choose the desired group (which even may contain just one alarm). Priority : Define the priority for which you want to get displayed all alarms. Permissible range: 0 to 255. Alarm classes : Mark a class which you want to get displayed and press button Add to add the class to the list in the window 'Alarm classes'. Do this for all required classes. In order to remove a marked entry from the alarm classes window press button Delete . TX1200 293 Version: 1.3