Visualization Row height : Height of the table rows in Pixel. Slider size : Height of the slider (Pixel) at the bottom of the table. Frame around selected rows : If this option is activated, selected table rows will get a frame. Show statusline : If this option is activated, below the alarm table a status bar will be displayed providing the following buttons for the operation in online mode: Acknowledge : All alarm entries marked in the alarm table get acknowledged. Acknowledge all : All alarm entries listed in the alarm table get acknowledged. History :
If this button is pressed, instead of the current status of the alarms the table will show a complete list of all events which have occured up to now (all transitions between any alarm stati). In this list no acknowledgement is possible ! Any new events will be added currently. If you have defined a record file, also there you will find this history for all alarm classes, for which the action 'Save' has been activated. Start : cancels Stop (see below) Stop : The current update of the list with newly occurring events will be stopped until it is restarted by pressing button 'Start'. Acknowledge variables :
This option is only available as long as you have not chosen option 'Show statusline' (see above). If it is activated, the functions described above for the status string buttons can get controlled by variables. In order to define these variables, choose a function from the selection list and enter a project variable in the assigned edit field. Thus for example the acknowledgement of all alarms in online mode can be done by a rising edge of the assigned variable. Trend Dialog for configuration of a Trend element The Trend element can be used to log the time dependent behaviour of variable values in the online mode.
It can be compared with the trace functionality..The online presentation is done in a diagram, in case of logging to a text file each of the values is written to a separate line. In the dialog for configuring visualization elements in category 'Trend' you can do the following settings : Curve : X/t, horizontal axis = time axis, vertical axis = scale of values Orientation : Left-right or Right.-left: The latest value will be displayed on the left/right side TX1200 296 Version: 1.3