Beckhoff Automation GmbH & Co. KG TX1200 — 10.1.4.3 Configure Alarm table

Visualization Axis: Horizontal axis: Dialog for configuration of the horizontal axis in the trend element Division lines: Activate option 'visible', if vertical division lines should be displayed which are elongating the scale marks. In this case define the 'Scale': The given number defines the interval between the division lines on the horizontal axis. Type (normal ___, dashed _ _ _, dotted ....., dashdotted _ . _ .) and color of the lines can be defined in dialogs which will open when you perform a mouse-click on the corresponding rectangle showing the currently set line type resp. color. Scale : The shown range of the scale is determined by the entry for Duration. If here e.g.

" T#20s0ms" is defined, the scale will display a period of 20 seconds. The Main division and the Sub scale division, which will be displayed by the means of long and short marks are to be defined according to the same syntax. Degree of accuracy : Define here (in the standard format for dates, e.g. T#50ms) the interval for displaying the current values of the variables. Legend : Here you define the display of the legend. Via button Font the standard dialog for setting the font will be opened. At Scaling define the distances between the particular letterings on the scale (e.g. T#4ms, if the scale markings should get a lettering each 4 milliseconds.

The lettering will contain the time and/or date, depending on which options are activated. The desired format each can be defined in the field 'format'. Variables : Here you can define project variables, which contain the zoom values resp. offset values for the horizontal scale. For example the offset of the display range of the horizontal axis will be set to "10" as soon as the variable assigned here gets value 10. Symbol bar : If option use is activated, at the bottom of the element a horizontal symbol bar will be added, providing buttons for scrolling and zooming in online mode.

The simple arrow buttons will move the displayed range along the time axis step by step, the double arrow buttons will shift it to the end resp. start of the record. The zoom buttons allow a zooming of the horizontal scale step by step. To get a possibility to restore the original settings concerning zoom and offset, define the vertical symbol bar to get the 'home' symbol. TX1200 297 Version: 1.3