Visualization Vertical Axis Dialog for configuration of the vertical axis in the trend element Division lines : corresponding to the horizontal axis (see above) Scale : Define whether the scale should be displayed at the left or right border of the trend diagram. Choose the Start value (lower end) and End value (upper end) of the scale as well as the Main and Sub scale divisions (longer and shorter markings will be displayed in the here defined distances). Legend : Font and divisions; see above, horizontal axis Variables : see above, horizontal axis Symbol bar :
see above, horizontal axis, additionally there is a "home" button for restoring the standard settings concerning zooming and offset of the axes. Recording : Define here whether the trend should be recorded 'only online', i.e. the time dependent behaviour of the variable values will be displayed using the chosen range of the scale, or whether the record should be saved to history file, which can be configured after pressing the button 'History'. The dialog corresponds to that which is used for the configuration of the alarm log file. In the log file for each time of measurement a separate line is written which contains the name and the values of all regarded variables.
Each line starts with a unique identifier in DWORD format, which is built from the date of measuring. Choose variable : Press this button to get the dialog Variables, where you can configure the variables for which the trend record should be done and how they should be displayed. Enter a project variable in column Variable (mouse-click on the field will open an edit frame). It is recommended to use the input assistant or Intellisense function. Color and Line type for the display of the variable in the record you can define by a mouse-click on the corresponding field in column Color (standard dialog for choosing a color) resp.
by selecting a line type in the corresponding field of column Line type (normal ___, dashed _ _ _, dotted ....., dashdotted _ . _ .) TX1200 298 Version: 1.3