Individual Components The settings for the program memory and the data memory are adjustable here: The data memory can be increased by pushing the slider to the left . The adjusted data memory is shown in the right data field. The program memory can be increased by pushing the slider to the right . The adjusted program memory is shown in the left data field It is possible to increase the program or the data memory generally, by activating the option "Large Model" 4.3 Managing Projects The commands which refer to entire project are found under the menu items "File" and "Project".
Some of the commands under "Project" deal with objects and are therefore described in the chapter Objects [ } 87] . Entries under the menu point File: 'File' 'New' With this command you create an empty project with the name "Untitled". This name must be changed when saving 'File' 'New from pattern' With this command you open any project that shuold be used as "pattern". A dialoge appears for selecting a project file, that can be openend with the name " Untitled". 'File' 'Open' With this command you open an already existing project. If a project has already been opened and changed, then TwinCAT PLC Control asks whether this project should be saved or not.
The dialog box for opening a file appears, and a project file with the extension "*.pro" or a library file with the extension "*.lib" must be chosen. This file must already exist. It is not possible to create a project with the command "Open" . To upload a project file from the PLC, press PLC at Open project from PLC . You will obtain, as next, the TX1200 66 Version: 1.3