Beckhoff Automation GmbH & Co. KG TX1200 — 4.3 Managing Projects

Individual Components 'File' 'Save' Shortcut: + With this command you save any changes in the project. If the project to be saved is called "Untitled", then you must give it a name (see "File" "Save as"). 'File' 'Save as' With this command the current project can be saved in another file or as a library. This does not change the original project file. After the command has been chosen the Save dialog box appears. Choose either an existing File name or enter a new file name and choose the desired file type. Dialog box for Save as You can also save the current project as a library in order to use it in other projects.

Choose the file type Internal library (*.lib) if you have programmed your POUs in TwinCAT PLC Control. Choose the file type External library (*.lib) if you want to integrate the POUs which have been implemented in other languages (e.g. C). This means that another file is also saved which receives the file name of the library, but with the extension "*.h". This file is constructed as a C header file with the declarations of all POUs, data types, and global variables. Then click OK. The current project is saved in the indicated file. If the new file name already exists, then you are asked if you want to overwrite this file. When 'saving as a library', the entire project is compiled.

If an error occurs thereby, then you are told that a correct project is necessary in order to create a library. The project is then not saved as a library. 'File' 'Save/Mail Archive' This command is used to set up and create a project archive file. All files which are referenced by and used with a TwinCAT PLC project can be packed in a compressed zip file. The zip file can be stored or can be directly sent in an email. This is useful if you want to give forward a set of all project relevant files. When the command is executed, the dialog box 'Save Archive' opens: TX1200 68 Version: 1.3