Individual Components Dialog box for opening an instance 'Project' 'Show call tree' With this command you open a window which shows the call tree of the object chosen in the Object Organizer. For this the project must be compiled (see "Rebuild all"). The call tree contains both calls for POUs and references to data types. Example of a call tree 'Project' 'Show cross reference list' With this command you open a dialog box which makes possible the output of all application points for a variable, address, or a POU. For this the project must be compiled (see "Rebuild all"). Choose first the category Variable, Address, or POU and then enter the name of the desired element.
To obtain all elements of the entered category enter a “*” in Name. By clicking on the button Get References you get the list of all application points. Along with the POU and the line or network number, the variable name and the address binding, if any, are specified. The Domain space shows whether this is a local or a global variable; the Access column shows whether the variable is to be accessed for ‚reading’ or ‚writing’ at the current location. When you select a line of the cross reference list and press the button Go To or doubleclick on the line, then the POU is shown in its editor at the corresponding point.
In this way you can jump to all application points without a time-consuming search. In order to make processing easier, you can use the Send to message window button to bring the current cross reference list into the message window and from there change to the respective POU. TX1200 98 Version: 1.3