Individual Components Dialog box and example of a cross reference list 4.5 Editing Functions You can use the following commands in all editors and some of them in the Object Organizer. All of the commands are located under the menu item "Edit". 'Edit' 'Undo' Shortcut: + This command undoes the action which was most recently executed in the currently-open editor window or in the Object Organizer. By repeatedly selecting this command, all actions can be undone back to the point at which the window was opened. This applies to all actions in the editors for POUs, data types and global variables and in the Object Organizer. With " Edit" "Redo " you can restore an action which you have undone.
'Edit' 'Redo' Shortcut: + With the command in the currently-open editor window or in the Object Organizer you can restore an action you have undone ("Edit" "Undo") .As often as you have previously executed the command "Undo" , you can also carry out the command "Redo". The commands "Undo" and "Redo" apply to the current window. The commands "Undo" and "Redo" apply to the current window. Each window carries its own action list. If you want to undo actions in several windows, then you must activate the corresponding window. When undoing or redoing in the Object Organizer the focus must lie here. 'Edit' 'Cut' Shortcut:
+ or + This command transfers the current selection from the editor to the clipboard. The selection is removed from the editor. In the Object Organizer this similarly applies to the selected object, whereby not all objects can be deleted, e.g. the PLC configuration. Remember that not all editors support the cut command, and that its use can be limited in some editors. The form of the selection depends upon the respective editor: In the text editors (IL, ST, and declarations) the selection is a list of characters.
In the FBD and LD editors the choice is a number of networks which are indicated by a dotted rectangle in the network number field or a box with all preceding lines, boxes, and operands. In the SFC editor the selection is a part of a series of steps surrounded by a dotted rectangle. TX1200 99 Version: 1.3