beckhoff TX1250 — 4.2 Drive Controlled Homing (SERCOS)

Examples 4 Examples 4.1 External Set value generator TwinCAT NC PTP offers the possibility to program own setpoint generators to move axes. This example shows how a PLC setpoint generator can be integrated into the system. The program implements a 3-phase generator with rectangular acceleration profile. Further information about external setpoint generator [ } 23] . The procedure for saving and installing the sample program is similar to the Axis movement example [ } 41] . The program is executable from TwinCAT version 2.9. Sample program 1 External setpoint generator: https://infosys.beckhoff.com/content/1033/tcncptp/ Resources/3456014603/.exe Sample program 2 External setpoint generator:

https://infosys.beckhoff.com/content/1033/tcncptp/ Resources/3456016011/.exe 4.2 Drive Controlled Homing (SERCOS) A SERCOS drive offers the homing function as a drive-controlled sequence. In this case, referencing is therefore not performed by the TwinCAT NC system, but by the drive itself. This sample shows how drive- controlled referencing is initialized and triggered by the TwinCAT PLC. The procedure for saving and installing the sample program is similar to the Axis movement example [ } 41] . Sample program Drive-controlled homing of a SERCOS axis: https://infosys.beckhoff.com/content/ 1033/tcncptp/Resources/3456320267/.zip TX1250 40 Version: 1.1