TwinCAT Slave Axes Parameters The parameter AccBound in mm/sІ is the desired acceleration limit of the slave axis. In order to avoid the algorithm becoming instable, a large enough limit must be chosen. Stability is ensured, if AccBound ≥ max(| Cf(t)|) * max(A+,-A-) is selected, where Cf(t) is the coupling factor at time t and A+ and A- are the acceleration limits of the master axis (if the master axis itself is a slave axis, an appropriate calculation must be carried out). Interfaces The interfaces consist of the System Manager, PLC blocks and the cyclic NC-PLC axis interface.
Decoupling and new end position Decoupling is possible in every dynamic state of the master axis - the slave axis is converted into a master axis and continues to travel as if it was still a slave axis, although it can be stopped individually. The coupling flag is reset. During offline decoupling (decoupling at standstill), the slave axis is converted into a PTP master axis. When decoupling online (decoupling in motion), the slave axis is converted back into a PTP master axis. A new end position in the direction of movement may be aimed for. TX1250 39 Version: 1.1