PMAC Product Guide X{data} Function : X-axis move Type : Motion program Syntax : X{data} where {data} is a floating point constant or expression representing the position or distance in user units for the X-axis. This command causes a move of the X-axis. (See {axis}{data} description in this section.) Examples: X10 X15 Y20 X(P1) Y30 X(Q10*COS(Q1)) Y(Q10*SIN(Q1)) X3.76 Z2.92 I0.075 K3.42 Y{data} Function : Y-axis move Type : Motion program Syntax : Y{data} where {data} is a floating point constant or expression representing the position or distance in user units for the Y-axis. This command causes a move of the Y-axis. (See {axis}{data} description in this section.) Examples:
Y50 Y(P100) X35 Y75 Y-0.221 Z3.475 Y(ABS(P3+P4)) A(INT(P3-P4)) Z{data} Function : Z-axis move Type : Motion program Syntax : Z{data} where {data} is a floating point constant or expression representing the position or distance in user units for the W-axis. This command causes a move of the Z-axis. (See {axis}{data} description in this section.) Examples: Z20 Z(Q25) X10 Y20 Z30 Z23.4 R10.5 Z(P301+2*P302/P303) Buffer Commands 243