User Manual of EM730 Series Inverter 127 than lower frequency limit F15.34 Fan control Ones place: fan control mode 0: running after power-on 1: running at startup 2: intelligent operation, subject to temperature control Tens place: power on fan control 0: run for 1 minute and then run in fan control mode 1: directly operate in fan control mode Hundreds place: Fan low speed mode enable (above 280kW) 1: the operation at low speed is invalid 2: low speed operation is valid 101 〇 0x0F22 F15.35 Overmodulatio n intensity 1.00 ~ 1.10 1.05 ● 0x0F23 F15.36 Switching options of PWM modulation mode 0: invalid (7-segment PWM modulation) 1:
valid (5-segment PWM modulation) 0 〇 0x0F24 F15.37 Switching frequency of PWM modulation mode 0.00 to maximum frequency F00.16 Hz 15.00 ● 0x0F25 F15.38 Options of dead zone compensation mode 0: no compensation 1: compensation mode 1 2: compensation mode 2 1 〇 0x0F26 F15.39 Terminal jog priorityv 0: invalid 1: valid 0 〇 0x0F27 F15.40 Deceleration time for quick stop 0.00 ~ 650.00 (F15.13=0) 0.0 ~ 6500.0 (F15.13=1) 0 ~ 65000 (F15.13=2) s 1.00 ● 0x0F28 F15.55 The current reaches the measured value 0.0～300.0（100.0% corresponding to rated motor current） % 100.0 ● 0x0F37