User Manual of EM730 Series Inverter 7-8. Both the main frequency source A and the auxiliary frequency source B have a set gain. Such parameters are mainly used to adjust the gain of each setting source, as shown in Fig. When synthesis is selected via the function code F00.06, a synthetic gain will be generated. The final setting is limited by the analog adjustment and upper and lower frequency limits. Fig. 7- 8 Frequency Source Setting Control (Gain Description) original set value * gain”. Below is only the description of the analog adjustment (F00.13). The gain type function codes (F00.10 to F00.12) are for “multiplication”, i.e. “set value = F00.13=0:
synthetic frequency of main and auxiliary channels The synthetic frequency is directly set to the synthetic frequency of main and auxiliary channels. F00.13=1: AI1 * synthetic frequency of main and auxiliary channels F00.13=2: AI2 * synthetic frequency of main and auxiliary channels 159 F00.11 Gain of auxiliary frequency source 0.0～300.0 % 100.0 ● 0x000B F00.12 Synthetic gain of main and auxiliary frequency sources 0.0～300.0 % 100.0 ● 0x000C F00.13 Analog adjustment of synthetic frequency 0: synthetic frequency of main and auxiliary channels 1: AI1 * synthetic frequency of main and auxiliary channels 2: AI2 * synthetic frequency of main and auxiliary channels 3: reserved 4: reserved 5:
high frequency pulse (PULSE) * synthetic frequency of main and auxiliary channels 0 〇 0x000D