User Manual of EM730 Series Inverter F16:00=9 ： EM100 comm macro The inverter can be used to configure the parameters of the corresponding function code for the EM100 comm macro. When the original EM100 model is used and Modbus communication function is set to F16.00=9, EM100 can be directly replaced without changing the PLC program of the customer. Common communication functions can be met, including write frequency, read output current, output frequency, and the running status of the inverter. F16:00=10: EM303B comm macro the EM303B comm macro.
The original EM303B model and Modbus communication function The inverter can be used to configure the parameters of the corresponding function code for is set to F16.00=10, EM303B can be directly replaced without changing the customer PLC program, common communication functions can be met, including write frequency, read output current, output frequency, and frequency converter running state; 299 voltage) F05.02 Multi-point VF Voltage point V1 0.0～100.0（100.0=rated voltage） % 2.0 ● 0x0502 F05.04 Multi-point VF Voltage point V2 0.0～100.0 % 5.5 ● 0x0504 F05.10 V/F stator voltage drop compensation gain 0.00～200.00 % 0.00 ● 0x050A F05.11 V/F slip compensation gain 0.00～200.00 % 0.00 ● 0x050B Function code Function code name EM100 communication Macro current value EM100 communicat ion macro address Correspondi ng function code EM303B communication macro current value EM303B Communication macro address corresponding function code Attribu te F00.04 Main frequency source A selection 0 0 〇