User Manual of EM730 Series Inverter Fig. 7-16 shows an example, where F16.03=8 and F16.04=5. When the count reaches the Fig. 7-16 Counting Example specified value 5, the output of “15: reach the specified value” will be valid. When the count reaches the set value 8, the output of “14: reach the set value” will be valid. When the input of “36: clear length” is valid, the count will be cleared to 0, and the outputs of “15: reach the specified value” and “14: reach the set value” will be invalid. Limit65535 ≥set count ≥specified count≥0. If the set count and specified count are 0, the counter function will be invalid. This function is allowed for one terminal only at a time.
Regular running function: The regular running function can be enabled by setting this function code other than 0. When the running time reaches the set time, the inverter will be shut down, and the terminal output of the option “26: reach the set time” will be valid, and there will be a prompt indicating that the inverter has been run for the set time. Users can view the remaining time of regular running by F18.35, or clear the current running time by the input function “27: clear regular running time” (i.e. resetting F18.35). This represents the set time in the non-running status and remaining time in the running status.
That is, one regular running process lasts from start to stop, and the accumulated time in the non-running status will be cleared. 307 Function code Function code name Parameter description Uni t Defaul t setting Attribut e Mailing address F16.05 Set time of regular running 0.0~6500.0, 0.0 is invalid min 0.0 ● 0x1005 Function code Function code name Parameter description Unit Default setting Attribute Mailing address F16.06 Agent password 0 ~ 65535 0 〇 0x1006