User Manual of EM730 Series Inverter 315 F18.14 Load rate Display the current load speed. For the correct display, please set the load speed display factor (F12.09). Scope: 0 ~ 65535. rpm 0x120E F18.15 UP/DOWN offset frequency Display the UP/DOWN offset frequency. See the UP/DOWN function description of F12.10 to F12.12. HHz 0x120F F18.16 PID setting Display the current PID setting, except for the current setting percentage (F09.03). 0x1210 F18.17 PID feedback Display the current PID feedback, except for the current feedback percentage (F09.03). 0x1211 F18.18 Power meter: MWh Display the cumulative input (output + fan) power consumption in MWh (thousand KWh).
The current power consumption can be obtained in conjunction with F18.19. MWh 0x1212 F18.19 Watt-hour meter: kWh Display the cumulative input (output + fan) power consumption in kWh (kilowatt-hour). The current power consumption can be obtained in conjunction with F18.18. kWh 0x1213 F18.20 Output power Display the current output power of the inverter. Scope: -650.00~650.00. kW 0x1214 F18.21 Output power factor Display the current output power factor of the inverter. Scope: -1.00 ~ 1.00. 0x1215 F18.22 Digital input terminal status 1 Display the current valid status of the input terminals X1 to X5. The five-bit digit tubes from left to right are:
0x1216 X5 X4 X3 X2 X1 0/1 0/1 0/1 0/1 0/1 The actual display effect is: 00000. ★: “0” means that the current terminal function is invalid; and “1” means that the current terminal function is valid. F18.23 Digital input terminal status 2 Display the current valid status of the input terminals AI1 and AI2. The five-bit digit tubes from left to right are: 0x1217 * AI2 AI1 * * 0/1 0/1 0/1 0/1 0/1 The actual display effect is: 0000. ★：The analog input terminals AI1 and AI2 of the EM730 series inverter can be used for digital input only. “0” means that the current terminal function is invalid; and “1” means that the current terminal function is valid.
F18.25 Output terminal state Display the current valid status of the output terminals R1/Y1. The five-bit digital tubes from left to right are: 0x1219 * * R1 * Y1 0/1 0/1 0/1 0/1 0/1 The actual display effect is: 000. “0” means that the current function terminal is invalid;