User Manual of EM730 Series Inverter The running status of EM730 series inverters during protection is explained in Table 7-25: Table 7-25 List of Running Statuses during Protection 7.21 F27 winding and unwinding application macro parameter group F27.00=0 Winding mode: This mode can be used for winding. After the default settings are restored, the parameters will be restored for winding applications. F27.00=1 Unwinding mode: This mode can be used for unwinding. After the default settings are restored, the parameters will be restored for unwinding applications. F27.00=2 Wire drawing mode: This mode can be used for wire drawing.
After the default settings are restored, the parameters will be restored for wire drawing applications. F27.00=3 Straight wire drawing machine mode: This mode can be used for the straight wire drawing machine. After the default settings are restored, the parameters will be restored for the straight wire drawing machine. 320 Keyboard display Detailed Explanation of Running Status of Inverter 0 Not running 1 Forward acceleration 2 Reverse acceleration 3 Forward deceleration 4 Reverse deceleration 5 Forward constant speed 6 Reverse constant speed Function code Function code name Parameter description Unit Default setting Attribute Mailing address F27.00 Application macro 0: winding mode 1:
unwinding mode 2: wire drawing mode 3: straight wire drawing machine mode 0 〇 0x1B00 Function Note 0: Winding 1: Unwinding 2: Wire 3: Straight wire