User Manual of EM730 Series Inverter 321 code mode mode drawing mode drawing machine mode Set F16.00=3, select the operation mode and restore the default settings. The application parameters are automatically set to the following default values. Basic parameters (the motor parameters need to be set manually and subject to static self-learning) F00.02 Command source 1: Terminal control 1: Terminal control 1:Terminal control 1: Terminal control F00.03 Terminal control mode 0: terminal RUN 0: terminal RUN 0: terminal RUN 0: terminal RUN F00.04 Main frequency A 1: AI1 setting 0: Digital setting 1: AI1 1: AI1 setting F00.05 Auxiliary frequency B 10: process PID 10: process PID 10:
process PID F00.06 Frequency source 6: Auxiliary frequency B + feedforward calculation 6: Auxiliary frequency B + feedforward calculation 6: Auxiliary frequency B + feedforward calculation F00.07 Main frequency A setting 75.00Hz F00.14 Acceleration time 1.00s 1.00s 70.00s 1.00s F00.15 Deceleration time 1.00s 1.00s 70.00s 1.00s