User Manual of EM760 High-Performance Inverter 295 F04.17 Starting time of S curve in deceleration s 1.00 ● 0x0411 F04.18 Ending time of S curve in deceleration s 1.00 ● 0x0412 F04.19 Stop mode 0: slow down to 1: free stop stop 0 O 0x0413 F04.20 Starting frequency of DC braking in stop 0.00 to maximum frequency F00.16 Hz 0.00 O 0x0414 F04.21 DC braking current in stop 0.0 to 100.0 (100.0 = rated current ofmotor) % 50.0 O 0x0415 F04.22 DC braking time in stop 0.00~30.00 0.00: invalid s 0.00 O 0x0416 F04.23 Demagnetization time for DC braking in stop 0.00~30.00 s 0.50 O 0x0417 F04.24 Flux braking gain 100-200 (100: no flux braking) 100 O 0x0418 F04.26 Start mode after failure/free stop 0:
start according to F04.00 setting mode 1: start of speed tracking 0 O 0x041A F04.27 Second confirmation of terminal start command 0: Not required for confirmation 1: to be confirmed 2: Way 2 for no confirmation (no confirmation is made even upon fault resetting) 0 O 0x041B F04.28 Minimum valid output frequency 0.00~50.00 (0.00: function invalid) Hz 0 O 0x041C F04.29 Zero speed check frequency 0.00~5.00 Hz 0.25 ● 0x041D F04.30 Initial magnetic pole search mode of synchronous motor 0: Invalid 1:
Mode 1 1 ● 0x041E F04.32 Gain of low- frequency excitation current regulation 0.0~300.0 % 100 0x0420 F04.33 Switching time of low-frequency excitation current regulation 0.00~10.00 s 0 0x0421 F05 V/F control parameter group F05.00 V/F curve setting 0: straight line V/F 0 O 0x0500