4-2 Function Mode 4 Functions •To display and set each parameter for the 2nd control (200s of function codes), allocate SET and SP-SET. •Parameters changeable during operation are as follows: 4-45 U/T1 V/T2 W/T3 Inverter SET /SP-SET L Motor 1 Motor 2 Parameter No.
Function name Selection SET SP-SET F002/F202 Acceleration time 1 Yes Yes F003/F203 Deceleration time 1 Yes Yes A001/A201 Frequency reference selection No Yes A002/A202 RUN command selection No Yes A003/A203 Base frequency No Yes A004/A204 Maximum frequency No Yes A020/A220 Multi-step speed reference 0 Yes Yes A042/A242 Manual torque boost voltage Yes Yes A043/A243 Manual torque boost frequency Yes Yes A044/A244 V/f characteristics selection No Yes A045/A245 Output voltage gain No Yes A046/A246 Automatic torque boost voltage compensation gain No Yes A047/A247 Automatic torque boost slip compensation gain No Yes A061/A261 Frequency upper limit Yes Yes A062/A262 Frequency lower limit Yes Yes A092/A292 Acceleration time 2 Yes Yes A093/A293 Deceleration time 2 Yes Yes A094/A294 2-step acceleration/deceleration selection Yes Yes A095/A295 2-step acceleration frequency Yes Yes A096/A296 2-step deceleration frequency Yes Yes b012/b212 Electronic thermal level No Yes b013/b213 Electronic thermal characteristics selection No Yes b021/b221 Overload limit selection No Yes