Supermicro 4021M-T2R+ / 4021M-82R+ — Supermicro 4021M-T2R+ / 4021M-82R+ Server User & Service Manual PDF

AS4021M-T2R+/4021M-82R+ User's Manual 1-3 Server Chassis Features The following is a general outline of the main features of the SC745S2-R800/ SC745TQ-R800 server chassis. System Power The SC745S2-R800/SC745TQ-R800 features a redundant 800W power supply composed of two separate power modules. This power redundancy feature allows you to replace a failed power supply without shutting down the system. Serial ATA Subsystem (4021M-T2R+ only) The SC745TQ-R800 supports up to six 3 Gb/s Serial ATA drives. The Serial ATA drives are hot-swappable units and are connected to a backplane that provides power and control. Note:

The operating system you use must have RAID support to enable the hot- swap capability of the Serial ATA drives. SCSI Subsystem (4021M-82R+ only) The SC745S2-R800 chassis was designed to support eight dual-channel SCSI hard drives, which are hot-swappable units. Note: The operating system you use must have RAID support to enable the hot- swap capability of the SCSI drives. Front Control Panel The control panel on the 4021M-T2R+/4021M-82R+ provides you with system monitoring and control. LEDs indicate system power, HDD activity, network activ- ity, system overheat and power supply failure. A main power button and a system reset button are also included.

In addition, two USB ports have been incorporated into the control panel to provide front side USB access. I/O Backplane The SC745S2-R800/SC745TQ-R800 is an ATX form factor chassis that may be used in either a tower or a 4U rackmount confi guration. The I/O backplane provides six motherboard expansion slots, one COM port, a parallel port, a VGA port, two USB 2.0 ports, PS/2 mouse and keyboard ports and two gigabit Ethernet ports. 1-4