Chapter 1: Introduction Cooling System The SC745S2-R800/SC745TQ-R800 chassis has an innovative cooling design that includes three 8-cm hot-plug system cooling fans located in the middle section of the chassis as well as two 8-cm hot-plug exhaust fans located at the rear of the chassis. An air shroud channels the airfl ow from the system fans to effi ciently cool the processor area of the system. The power supply module also includes a cooling fan. Figure 1-1. Intel nVidia MCP55 Pro Chipset: System Block Diagram Note: This is a general block diagram. Please see Chapter 5 for details.
16 x 16 HT link (1 GHz) 128-bit data + 16-bit ECC DDR2-667/533/400 DDR2-667/533/400 128-bit data + 16-bit ECC 16 x 16 HT link (1 GHz) DIMM 3A DIMM 4A DIMM 4B DIMM 4A Slot 6: PCI-E x8 SATA Ports (6) Slot 5: PCI-E x8 nVidia IDE (ATA133) Slot 3: PCI-X 133/100 MHz PCI-X Ch B NEC uPD720400 MCP55Pro USB Ports (6) Slot 4: PCI-X 133/100 MHz PCI Bus ATI ES1000 PCI-X Ch A PCI-Exp x8 Bus GLAN Ports (2) Slot 1: PCI-X 100/66 MHz AIC- 7902 LPC Slot 2: PCI-X 100/66 MHz (ZCR) S I/O BIOS IPMI SCSI Ports (2) Floppy Kybd/ Mouse Serial Ports (2) Note: The AIC-7902 SCSI controller is only on the H8DM8-2 (4021M-82R+).
1-5 DIMM 1A AMD Socket F CPU2 DIMM 2B DIMM 2A DIMM 3B DIMM 3A DIMM 4B AMD Socket F CPU1 DIMM 1B DIMM 1A DIMM 2B DIMM 2A DIMM 3B