AS4021M-T2R+/4021M-82R+ User's Manual ATX PS/2 Keyboard and PS/2 Mouse Ports The ATX PS/2 keyboard and the PS/2 mouse ports are located on the IO backplane. The mouse is the top (green) port. See the table on the right for pin defi nitions. Serial Ports The COM1 and COM2 serial ports are located under the parallel port. Refer to the serverboard layout for locations and the table on the right for pin defi nitions. Note: NC indicates no connection. Fan Headers The H8DME-2/H8DM8-2 has eight fan headers, which are designated FAN1 through FAN8. Fans are Pulse Width Modulated (PWM) and their speed is controlled via Thermal Management with a BIOS setting.
See the table on the right for pin defi nitions. Note: when using active heatsinks (those with fans), connect the heatsink fan for CPU1 to the FAN7 header and the heatsink fan for CPU2 to the FAN8 header. JLAN1/2 (Ethernet Ports) Two Gigabit Ethernet ports (desig- nated JLAN1 and JLAN2) are located Notes: JLAN1 is the top port and JLAN2 is the beside the COM2 port. These Ether- net ports accept RJ45 type cables. bottom port.
5-16 PS/2 Keyboard and Mouse Port Pin Defi nitions Pin# Defi nition 1 Data 2 NC 3 Ground 4 VCC 5 Clock 6 NC Serial Port Pin Defi nitions (COM1/COM2) Pin # Defi nition Pin # Defi nition 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 Ground 10 NC Fan Header Pin Defi nitions (FAN1-8) Pin# Defi nition 1 Ground (Black) 2 +12V (Red) 3 Tachometer 4 PWM Control