Supermicro 4021M-T2R+ / 4021M-82R+ — Supermicro 4021M-T2R+ / 4021M-82R+ Server User & Service Manual PDF

AS4021M-T2R+/4021M-82R+ User's Manual 5-10 Onboard Indicators JLAN1/JLAN2 LEDs The Ethernet ports (located beside the VGA port) have two LEDs. On each Gb LAN port, one LED indicates activity when blinking while the other LED may be amber or off to indicate the speed of the connection. See the table on the right for the func- tions associated with the connection speed LED. +3.3V Standby LED When illuminated, the DP4 LED indi- cates that +3.3V standby power from the power supply is being supplied to the serverboard. DP4 should normally be illuminated when the system is con- nected to AC power, whether turned on or not.

DP4 will fl ash on and off when the system is in an S1, S3 (Suspend to RAM) or S4 (Suspend to Disk) state.See the table on the right for DP4 LED states. SCSI Activity LEDs (H8DM8-2 only) When illuminated, the DA1 and DA2 LEDs indicate activity on SCSI chan- nels A and B, respectively. These LEDs are located near the SCSI con- troller chip. See the table on the right for LED states.

5-24 JLAN LED (Connection Speed Indicator) LED Color Defi nition Off 10/100 MHz Amber 1 GHz +3.3V Standby LED (DP4) State System Status On Standby power present on serverboard Off No power connected Flashing System in standby state SCSI Activity LEDs (DA1, DA2) State System Status On SCSI channel active Off SCSI channel inactive